Starter pack nails gel for training nail stylist

What is the difference between the BASE and BASE+ Utopian Gel Polish?

Both have the same effect and give good adhesion to the natural nail after properly prepping the natural nail.

It is more of a personal choice as to which BASE you prefer.

The BASE is rather more liquid than the BASE+ and can be applied very finely.

The BASE+ is a slightly thicker gel polish and will fill in ridges and irregularities of the natural nail.

Both have very good adhesion to the nail plate.

As a nail stylist, you choose the base you prefer to work with and if, despite good PREP of the nail, you still encounter challenges, you can adjust your base.

Here SO GUILTY thinks with you because every client is unique and in this way you always have the right solution for your client at hand.

The additional qualities at a glance:

The BASE and BASE+ are flexible on the nail and move with it. This makes them less prone to loosening or breaking.

BASE

• Good adhesion
• Available in 5 and 12 ml
• Acid-free
• Soakable 10min
• Thin gel varnish
• High viscosity
• Curing 30sec LED
• Acid-free
• transparent

BASE+

• Good adhesion
• Available in 5 and 12ml
• Acid-free
• Soakable 10min
• Medium viscosity
• Evens out irregularities and imperfections
• Does not flow into the cuticle
• Cures 30sec LED
• Acid-free
• transparent

Catalise a base coat maximum 30 seconds in UV LED lamp. A base coat that is overcured can become too hard on the nail, compromising its durability by pieces jumping off or breaking.

Usage:

After prepping the nail properly, apply a thin layer of BASE or BASE+ Utopian Gelpolish to the nail.

CAUTION; DO NOT touch skin, as touching the skin can cause lifting and is can possibly cause allergies.

Cure the Base for a maximum of 30 seconds in a UV LED Lamp or SO FAST WAVE DIGITAL PINK lamp. If you still use a standard UV Bulb lamp, cure for 1 minute.

Please note that you can always contact one of our staff members for all your questions or guidance

The different applications of rubber base

the use of rubber base is multifunctional and even though it is original from the gel polish range, it has now proven that it has a strong adhesion quality on nails for all gel products

• Can be used as a Base Coat for gel polish - Utopian Gelpolish, where you polish a thin ironing layer into the nail plate.
• Used for natural nail strengthening, you build up the nail a bit and you can also extend the nail 1-2mm.
• Can also be used as a base under gel and acrylic products to ensure better adhesion.
• Can be used over nail art for better protection and thanks to its flexible nature it will increase the durability of your nail art, both the drawn Nail Art and the stones or other ornaments.
• Can be applied over acrylic as an extra bond between acrylic and color gel or gel polish
• OR to level out imperfections caused by filing the construction of your artificial product such as acrylic, gel or acrylic gel.

Thanks to its flexible and slightly acidic characteristics, RUBBERBASE has superior adhesion.

RUBBERBASE or also called BIAB (=Builder In A Bottle)

But why is RUBBERBASE now called BIAB?

RUBBERBASE was the 1st and initial name, but because you can build lightly with it like you do with building gels. Not much of course, but that's why it was regarded as building in a bottle, so BIAB = Builder In A Bottle.

The rubber base has superior adhesion because it penetrates into the 1st 5 cell layers to adhere.

Features of Rubberbase:

Rubberbase is not only a strong adhesive layer for all gel products, but can also be used for your nail art.

• Available in 5 and 12ml brush bottles
• Available in jar 5gr/15gr/50gr
• Available in more than 26 colors and transparent
• Superior adhesion
• Contains acid
• Soaking time 10-30 minutes depending on the thickness
• Can be milled
• Suitable as a base for gel polish, gel, acrylic and acrylic gel
• Suitable for Nail art protection
• Holds Nail art stones
• Also suitable for thin, brittle and splitting nails
• Flexible and elastic on the nail
• Evens out the nail
• Thick viscosity
• Cure in 30 sec LED
• Can be applied thicker to create an APEX (bulge on nail).

Use of Rubberbase

Discover different ways in which the Rubberbase can be used.

• Method 1: You can use the RUBBERBASE as a Gellak Base Coat (link to Base and base+). Apply 1 thin layer to the nail plate by making small movements forwards and backwards that you polish the RUBBERBASE / BIAB into the nail. Catalyze in a LED UV Lamp for 30 seconds. Do not touch the skin to prevent lifting and allergies. Then you apply your 2 layers of gel polish color and your top coat (harden each layer)

• Method 2: Apply 1 thin layer to the nail plate by making small movements forward and backward that you polish the RUBBERBASE / BIAB into the nail. Catalyst in a LED UV Lamp for 30 seconds

Then you apply a layer of RUBBERBASE/ BIAB and take a drop on your brush, if you work with the bottle take a drop and hold your brush on the side and put RUBBERBASE/ BIAB on the APEX part. Divide the sides of the amount over the nail with a Microstyler 0001 or 006

If necessary, hold the nail upside down to make the APEX form better.

Cure in the UV LED Lamp for 60 seconds

If you have shaped / built nicely, which is very easy with the RUBBERBASE / BIAB  then you do not have to file and you can immediately start placing your color and then your top coat

Would you like additional information about the Rubberbase of SO GUILTY - Iconic Nails?

We would like to inform you, please feel free to contact us

The different applications of rubber base

the use of rubber base is multifunctional and even though it is original from the gel polish range, it has now proven that it has a strong adhesion quality on nails for all gel products

• Can be used as a Base Coat for gel polish - Utopian Gelpolish, where you polish a thin ironing layer into the nail plate.
• Used for natural nail strengthening, you build up the nail a bit and you can also extend the nail 1-2mm.
• Can also be used as a base under gel and acrylic products to ensure better adhesion.
• Can be used over nail art for better protection and thanks to its flexible nature it will increase the durability of your nail art, both the drawn Nail Art and the stones or other ornaments.
• Can be applied over acrylic as an extra bond between acrylic and color gel or gel polish
• OR to level out imperfections caused by filing the construction of your artificial product such as acrylic, gel or acrylic gel.

Thanks to its flexible and slightly acidic characteristics, RUBBERBASE has superior adhesion.

RUBBERBASE or also called BIAB (=Builder In A Bottle)

But why is RUBBERBASE now called BIAB?

RUBBERBASE was the 1st and initial name, but because you can build lightly with it like you do with building gels. Not much of course, but that's why it was regarded as building in a bottle, so BIAB = Builder In A Bottle.

The rubber base has superior adhesion because it penetrates into the 1st 5 cell layers to adhere.

Features of Rubberbase:

Rubberbase is not only a strong adhesive layer for all gel products, but can also be used for your nail art.

• Available in 5 and 12ml brush bottles
• Available in jar 5gr/15gr/50gr
• Available in more than 26 colors and transparent
• Superior adhesion
• Contains acid
• Soaking time 10-30 minutes depending on the thickness
• Can be milled
• Suitable as a base for gel polish, gel, acrylic and acrylic gel
• Suitable for Nail art protection
• Holds Nail art stones
• Also suitable for thin, brittle and splitting nails
• Flexible and elastic on the nail
• Evens out the nail
• Thick viscosity
• Cure in 30 sec LED
• Can be applied thicker to create an APEX (bulge on nail).

Use of Rubberbase

Discover different ways in which the Rubberbase can be used.

• Method 1: You can use the RUBBERBASE as a Gellak Base Coat (link to Base and base+). Apply 1 thin layer to the nail plate by making small movements forwards and backwards that you polish the RUBBERBASE / BIAB into the nail. Catalyze in a LED UV Lamp for 30 seconds. Do not touch the skin to prevent lifting and allergies. Then you apply your 2 layers of gel polish color and your top coat (harden each layer)

• Method 2: Apply 1 thin layer to the nail plate by making small movements forward and backward that you polish the RUBBERBASE / BIAB into the nail. Catalyst in a LED UV Lamp for 30 seconds

Then you apply a layer of RUBBERBASE/ BIAB and take a drop on your brush, if you work with the bottle take a drop and hold your brush on the side and put RUBBERBASE/ BIAB on the APEX part. Divide the sides of the amount over the nail with a Microstyler 0001 or 006

If necessary, hold the nail upside down to make the APEX form better.

Cure in the UV LED Lamp for 60 seconds

If you have shaped / built nicely, which is very easy with the RUBBERBASE / BIAB  then you do not have to file and you can immediately start placing your color and then your top coat

Would you like additional information about the Rubberbase of SO GUILTY - Iconic Nails?

We would like to inform you, please feel free to contact us

The different applications of rubber base

the use of rubber base is multifunctional and even though it is original from the gel polish range, it has now proven that it has a strong adhesion quality on nails for all gel products

• Can be used as a Base Coat for gel polish - Utopian Gelpolish, where you polish a thin ironing layer into the nail plate.
• Used for natural nail strengthening, you build up the nail a bit and you can also extend the nail 1-2mm.
• Can also be used as a base under gel and acrylic products to ensure better adhesion.
• Can be used over nail art for better protection and thanks to its flexible nature it will increase the durability of your nail art, both the drawn Nail Art and the stones or other ornaments.
• Can be applied over acrylic as an extra bond between acrylic and color gel or gel polish
• OR to level out imperfections caused by filing the construction of your artificial product such as acrylic, gel or acrylic gel.

Thanks to its flexible and slightly acidic characteristics, RUBBERBASE has superior adhesion.

RUBBERBASE or also called BIAB (=Builder In A Bottle)

But why is RUBBERBASE now called BIAB?

RUBBERBASE was the 1st and initial name, but because you can build lightly with it like you do with building gels. Not much of course, but that's why it was regarded as building in a bottle, so BIAB = Builder In A Bottle.

The rubber base has superior adhesion because it penetrates into the 1st 5 cell layers to adhere.

Features of Rubberbase:

Rubberbase is not only a strong adhesive layer for all gel products, but can also be used for your nail art.

• Available in 5 and 12ml brush bottles
• Available in jar 5gr/15gr/50gr
• Available in more than 26 colors and transparent
• Superior adhesion
• Contains acid
• Soaking time 10-30 minutes depending on the thickness
• Can be milled
• Suitable as a base for gel polish, gel, acrylic and acrylic gel
• Suitable for Nail art protection
• Holds Nail art stones
• Also suitable for thin, brittle and splitting nails
• Flexible and elastic on the nail
• Evens out the nail
• Thick viscosity
• Cure in 30 sec LED
• Can be applied thicker to create an APEX (bulge on nail).

Use of Rubberbase

Discover different ways in which the Rubberbase can be used.

• Method 1: You can use the RUBBERBASE as a Gellak Base Coat (link to Base and base+). Apply 1 thin layer to the nail plate by making small movements forwards and backwards that you polish the RUBBERBASE / BIAB into the nail. Catalyze in a LED UV Lamp for 30 seconds. Do not touch the skin to prevent lifting and allergies. Then you apply your 2 layers of gel polish color and your top coat (harden each layer)

• Method 2: Apply 1 thin layer to the nail plate by making small movements forward and backward that you polish the RUBBERBASE / BIAB into the nail. Catalyst in a LED UV Lamp for 30 seconds

Then you apply a layer of RUBBERBASE/ BIAB and take a drop on your brush, if you work with the bottle take a drop and hold your brush on the side and put RUBBERBASE/ BIAB on the APEX part. Divide the sides of the amount over the nail with a Microstyler 0001 or 006

If necessary, hold the nail upside down to make the APEX form better.

Cure in the UV LED Lamp for 60 seconds

If you have shaped / built nicely, which is very easy with the RUBBERBASE / BIAB  then you do not have to file and you can immediately start placing your color and then your top coat

Would you like additional information about the Rubberbase of SO GUILTY - Iconic Nails?

We would like to inform you, please feel free to contact us

The different applications of rubber base

the use of rubber base is multifunctional and even though it is original from the gel polish range, it has now proven that it has a strong adhesion quality on nails for all gel products

• Can be used as a Base Coat for gel polish - Utopian Gelpolish, where you polish a thin ironing layer into the nail plate.
• Used for natural nail strengthening, you build up the nail a bit and you can also extend the nail 1-2mm.
• Can also be used as a base under gel and acrylic products to ensure better adhesion.
• Can be used over nail art for better protection and thanks to its flexible nature it will increase the durability of your nail art, both the drawn Nail Art and the stones or other ornaments.
• Can be applied over acrylic as an extra bond between acrylic and color gel or gel polish
• OR to level out imperfections caused by filing the construction of your artificial product such as acrylic, gel or acrylic gel.

Thanks to its flexible and slightly acidic characteristics, RUBBERBASE has superior adhesion.

RUBBERBASE or also called BIAB (=Builder In A Bottle)

But why is RUBBERBASE now called BIAB?

RUBBERBASE was the 1st and initial name, but because you can build lightly with it like you do with building gels. Not much of course, but that's why it was regarded as building in a bottle, so BIAB = Builder In A Bottle.

The rubber base has superior adhesion because it penetrates into the 1st 5 cell layers to adhere.

Features of Rubberbase:

Rubberbase is not only a strong adhesive layer for all gel products, but can also be used for your nail art.

• Available in 5 and 12ml brush bottles
• Available in jar 5gr/15gr/50gr
• Available in more than 26 colors and transparent
• Superior adhesion
• Contains acid
• Soaking time 10-30 minutes depending on the thickness
• Can be milled
• Suitable as a base for gel polish, gel, acrylic and acrylic gel
• Suitable for Nail art protection
• Holds Nail art stones
• Also suitable for thin, brittle and splitting nails
• Flexible and elastic on the nail
• Evens out the nail
• Thick viscosity
• Cure in 30 sec LED
• Can be applied thicker to create an APEX (bulge on nail).

Use of Rubberbase

Discover different ways in which the Rubberbase can be used.

• Method 1: You can use the RUBBERBASE as a Gellak Base Coat (link to Base and base+). Apply 1 thin layer to the nail plate by making small movements forwards and backwards that you polish the RUBBERBASE / BIAB into the nail. Catalyze in a LED UV Lamp for 30 seconds. Do not touch the skin to prevent lifting and allergies. Then you apply your 2 layers of gel polish color and your top coat (harden each layer)

• Method 2: Apply 1 thin layer to the nail plate by making small movements forward and backward that you polish the RUBBERBASE / BIAB into the nail. Catalyst in a LED UV Lamp for 30 seconds

Then you apply a layer of RUBBERBASE/ BIAB and take a drop on your brush, if you work with the bottle take a drop and hold your brush on the side and put RUBBERBASE/ BIAB on the APEX part. Divide the sides of the amount over the nail with a Microstyler 0001 or 006

If necessary, hold the nail upside down to make the APEX form better.

Cure in the UV LED Lamp for 60 seconds

If you have shaped / built nicely, which is very easy with the RUBBERBASE / BIAB  then you do not have to file and you can immediately start placing your color and then your top coat

Would you like additional information about the Rubberbase of SO GUILTY - Iconic Nails?

We would like to inform you, please feel free to contact us

The different applications of rubber base

the use of rubber base is multifunctional and even though it is original from the gel polish range, it has now proven that it has a strong adhesion quality on nails for all gel products

• Can be used as a Base Coat for gel polish - Utopian Gelpolish, where you polish a thin ironing layer into the nail plate.
• Used for natural nail strengthening, you build up the nail a bit and you can also extend the nail 1-2mm.
• Can also be used as a base under gel and acrylic products to ensure better adhesion.
• Can be used over nail art for better protection and thanks to its flexible nature it will increase the durability of your nail art, both the drawn Nail Art and the stones or other ornaments.
• Can be applied over acrylic as an extra bond between acrylic and color gel or gel polish
• OR to level out imperfections caused by filing the construction of your artificial product such as acrylic, gel or acrylic gel.

Thanks to its flexible and slightly acidic characteristics, RUBBERBASE has superior adhesion.

RUBBERBASE or also called BIAB (=Builder In A Bottle)

But why is RUBBERBASE now called BIAB?

RUBBERBASE was the 1st and initial name, but because you can build lightly with it like you do with building gels. Not much of course, but that's why it was regarded as building in a bottle, so BIAB = Builder In A Bottle.

The rubber base has superior adhesion because it penetrates into the 1st 5 cell layers to adhere.

Features of Rubberbase:

Rubberbase is not only a strong adhesive layer for all gel products, but can also be used for your nail art.

• Available in 5 and 12ml brush bottles
• Available in jar 5gr/15gr/50gr
• Available in more than 26 colors and transparent
• Superior adhesion
• Contains acid
• Soaking time 10-30 minutes depending on the thickness
• Can be milled
• Suitable as a base for gel polish, gel, acrylic and acrylic gel
• Suitable for Nail art protection
• Holds Nail art stones
• Also suitable for thin, brittle and splitting nails
• Flexible and elastic on the nail
• Evens out the nail
• Thick viscosity
• Cure in 30 sec LED
• Can be applied thicker to create an APEX (bulge on nail).

Use of Rubberbase

Discover different ways in which the Rubberbase can be used.

• Method 1: You can use the RUBBERBASE as a Gellak Base Coat (link to Base and base+). Apply 1 thin layer to the nail plate by making small movements forwards and backwards that you polish the RUBBERBASE / BIAB into the nail. Catalyze in a LED UV Lamp for 30 seconds. Do not touch the skin to prevent lifting and allergies. Then you apply your 2 layers of gel polish color and your top coat (harden each layer)

• Method 2: Apply 1 thin layer to the nail plate by making small movements forward and backward that you polish the RUBBERBASE / BIAB into the nail. Catalyst in a LED UV Lamp for 30 seconds

Then you apply a layer of RUBBERBASE/ BIAB and take a drop on your brush, if you work with the bottle take a drop and hold your brush on the side and put RUBBERBASE/ BIAB on the APEX part. Divide the sides of the amount over the nail with a Microstyler 0001 or 006

If necessary, hold the nail upside down to make the APEX form better.

Cure in the UV LED Lamp for 60 seconds

If you have shaped / built nicely, which is very easy with the RUBBERBASE / BIAB  then you do not have to file and you can immediately start placing your color and then your top coat

Would you like additional information about the Rubberbase of SO GUILTY - Iconic Nails?

We would like to inform you, please feel free to contact us

The different applications of rubber base

the use of rubber base is multifunctional and even though it is original from the gel polish range, it has now proven that it has a strong adhesion quality on nails for all gel products

• Can be used as a Base Coat for gel polish - Utopian Gelpolish, where you polish a thin ironing layer into the nail plate.
• Used for natural nail strengthening, you build up the nail a bit and you can also extend the nail 1-2mm.
• Can also be used as a base under gel and acrylic products to ensure better adhesion.
• Can be used over nail art for better protection and thanks to its flexible nature it will increase the durability of your nail art, both the drawn Nail Art and the stones or other ornaments.
• Can be applied over acrylic as an extra bond between acrylic and color gel or gel polish
• OR to level out imperfections caused by filing the construction of your artificial product such as acrylic, gel or acrylic gel.

Thanks to its flexible and slightly acidic characteristics, RUBBERBASE has superior adhesion.

RUBBERBASE or also called BIAB (=Builder In A Bottle)

But why is RUBBERBASE now called BIAB?

RUBBERBASE was the 1st and initial name, but because you can build lightly with it like you do with building gels. Not much of course, but that's why it was regarded as building in a bottle, so BIAB = Builder In A Bottle.

The rubber base has superior adhesion because it penetrates into the 1st 5 cell layers to adhere.

Features of Rubberbase:

Rubberbase is not only a strong adhesive layer for all gel products, but can also be used for your nail art.

• Available in 5 and 12ml brush bottles
• Available in jar 5gr/15gr/50gr
• Available in more than 26 colors and transparent
• Superior adhesion
• Contains acid
• Soaking time 10-30 minutes depending on the thickness
• Can be milled
• Suitable as a base for gel polish, gel, acrylic and acrylic gel
• Suitable for Nail art protection
• Holds Nail art stones
• Also suitable for thin, brittle and splitting nails
• Flexible and elastic on the nail
• Evens out the nail
• Thick viscosity
• Cure in 30 sec LED
• Can be applied thicker to create an APEX (bulge on nail).

Use of Rubberbase

Discover different ways in which the Rubberbase can be used.

• Method 1: You can use the RUBBERBASE as a Gellak Base Coat (link to Base and base+). Apply 1 thin layer to the nail plate by making small movements forwards and backwards that you polish the RUBBERBASE / BIAB into the nail. Catalyze in a LED UV Lamp for 30 seconds. Do not touch the skin to prevent lifting and allergies. Then you apply your 2 layers of gel polish color and your top coat (harden each layer)

• Method 2: Apply 1 thin layer to the nail plate by making small movements forward and backward that you polish the RUBBERBASE / BIAB into the nail. Catalyst in a LED UV Lamp for 30 seconds

Then you apply a layer of RUBBERBASE/ BIAB and take a drop on your brush, if you work with the bottle take a drop and hold your brush on the side and put RUBBERBASE/ BIAB on the APEX part. Divide the sides of the amount over the nail with a Microstyler 0001 or 006

If necessary, hold the nail upside down to make the APEX form better.

Cure in the UV LED Lamp for 60 seconds

If you have shaped / built nicely, which is very easy with the RUBBERBASE / BIAB  then you do not have to file and you can immediately start placing your color and then your top coat

Would you like additional information about the Rubberbase of SO GUILTY - Iconic Nails?

We would like to inform you, please feel free to contact us

Benefits of the Pre - Clean for applying your nails :

Pre clean is very easy to use with a nail wipe and will also apply a light scrub to the nails to further remove all dust.

• Adhesion : Thanks to the temporary removal of moisture and grease from the nail, the artificial product ( gel, gel polish, acrylic, etc.) you place next can adhere better to the nail for longer durability.
• Simplicity: the PRE - CLEAN 250ml has an anti-leak cap to make it easy to apply the right amount to a wipe. That way, you work economically.
• Bulk: you can also get PRE - CLEAN in a larger format which you can then pour into a dispenser to work neatly and quickly.
  
  

What we advise everyone with or without artificial nails:

Even though PRE - CLEAN is a temporary degreaser and the nail will recover its natural moisture balance within 20 minutes, we advise everyone, whether or not you apply artificial product to the nails, that is to moisturise the nails.

Like you do with your skin, but nails are often forgotten even though they are exposed to more extreme conditions and need more nutrition than skin.

Always advise your client to apply cuticle oil under the nail and at the cuticle preferably twice a day. This is necessary to ensure good adhesion of your artificial product in the long term.

Thanks to oil, moisture moves more slowly in the nail and the nail does not get dried out as quickly by external influences such as weather and water. A nail that has dried out too much does not hold artificial product as well because the nail cells detach and flake off each other. The cells then stick to the artificial product making it appear that the product is detaching, but it is actually the cells that are detaching from each other.

When do you use the PRE - CLEAN?

we explain to you in the handy step-by-step of the PRE PREP

Need more explanation?

Would you like more info on this product or other questions? Feel free to contact us info@beautyambitions.eu or via contact. We are happy to help.

What are the benefits of Breeze bond?

Apply the Breeze bond to a well-prepared and degreased nail and discover why it is necessary to use it with every nail treatment.

• Simple application
• Not in the lamp, air-dry
• Does not contain acids
• Prevents air, lifting
• Compatible with all art product (equally well with other brands)
• Does not damage the natural nail
• Odourless

How to use Breeze bond

Prepare the nails & degrease the nails. Afterwards you apply the Breeze bond in small amount on each nail. The product is air-drying, so it does not need to be placed in the lamp.

Do you prefer a primer with acids? Then you can opt for the SO Primer Acid.

Are you going for the ultimate bonding power? Then you can combine both products.

Extra information

If you have prepared all the nails, make sure that your client's hands remain on the table. Once the degreaser has been placed, you must ensure that your customer is aware that he/she remains seated and does not move their hands, unless you request this. I say this because the slightest contact with e.g. skin and the nail plate can cause your nail plate to become 'fat' again. This will also cause loosening of the product. So basically every time your customer scratches the hair, puts a hand under the head for support, the customer picks up the phone, ... or else, during the preparation of your nails, degrease and prepare the nails again.

First use the pre-prep and breeze bond in combination & guarantee the ultimate adhesion of your product.

Would you like more information about the Breeze bond?

Contact our team and we will gladly provide you with all additional information.

De perfecte dekking van SO GUILTY color gel

De kleurgels van SO GUILTY - iconic Nails zijn hoog gepigmenteerde kleuren die perfect dekken in 2 lagen, meestal is zelfs 1 laag voldoende om de ideale dekking te bekomen.
Ze zijn eenvoudig om mee te werken, en kunnen bijgevolg dus op een eenvoudige manier aangebracht worden.
De color gels zijn over het algemeen iets dikker van structuur dan de utopian gelpolish kleuren. Ze zullen mooi op hun plaats blijven zitten, waardoor ze niet in de nagelriemen zullen uitlopen, maar toch egaliseren ze zich zeer mooi.

Wat maakt de color gels van SO GUILTY zo uniek?

Als professionele nagelstyliste zijn deze kleuren subliem om mee te werken, door het eenvoudig aanbrengen en de hoge pigmentering bespaar je tijd, en dat wil jij toch ook, niet?

Je kan colorgel aanbrengen op gel, Polygel of acryl.

• Hooggepigmenteerde kleuren
• meer dan 125 verschillende kleuren
• Dekken in 1-2 lagen
• Eenvoudig in gebruik
• krimpen niet
• zijn self levelend

Hoe kan je de SO GUILTY Colorgel gebruiken?

1. Plaats een laag kleur op jouw gel, acryl, acrygel/Polygel/EPIC Fusion.
2. Plaats jouw penseel tot op 3mm van de nagelriem & voer een lichte druk uit tot je
   penseel de breedte aanneemt van de nagelriem. Nadien verschuif je jouw penseel zo
   dicht mogelijk naar de nagelriem zonder deze te raken.
3. Houd je penseel plat en ga zwevend zonder druk over heel de nagel.
4. Vervolgens draai de vinger naar een kant en herhaal met de ene helft van je penseel de
   voorgaande stap en lijn je mooi af aan de zijwallijn zonder de huid te raken en ga over
   heel de zijkant.
5. Draaide vinger, en herhaal dezelfde stap aan de andere zijde
6. Ga even heel licht plat penseel en zwevend over heel de nagel om te egaliseren en sluit
   de vrije rand af. (= is de rand van de nagel vrijerand)
7. Hard 60 seconden uit
8.  Breng indien nodig een 2de laag aan

Interessant advies 

Gebruik verschillende penselen. Opteer om standaard verschillende penselen in je collectie te nemen, dit zodanig je glitter bijvoorbeeld niet vermengd raken in jouw effen kleuren. Zo kan je een penseel nemen voor lichte kleuren, donkere kleuren, fluo kleuren & glitters. Op deze manier bespaar je ook tijd bij het reinigen van jouw penseel.

Vragen over de SO GUILTY Colorgels?

neem contact met ons team info@beautyambitions.eu

The SO Easy Build from the SO GUILTY - Iconic Nails range literally translates to 'So easy to build', and that is exactly what it does. With its auto-leveling structure, you build your nails in no time!

It sets itself nicely into shape, ensuring a beautiful build-up & minimal filing afterwards.

Also, it won't get hot in the lamp, so you won't feel any heat under it.

The function of the SO EASY BUILD building gel

We have been used to building gel coming out of a jar for years, but why choose to use it in a jar? It is mainly the ease and speed with which you can work once you are used to working from a bottle.

• This flexible building gel can be used to strengthen natural nails by forming a nice APEX
• Gives the necessary strength to lengthen nails, both with stencils and tips.
• Can be used for any nail type.

The special features of SO EASY build

we list all the special features for you:

• Building gel in a bottle
• NO HEAT formula - Does not burn in the lamp
• Very good adhesion
• Flexible on the nail
• Self-leveling, very good self-levelling
• Can be placed on tips
• Extend with nail forms
• Strengthen natural nail
• Medium / Low viscosity
• Cures in 60sec LED 48W - 120sec UV lamp 36W
• Acid free
• Available in 3 colours (Clear, Sweet Boomer, Soft White)
• Available in bottles with brush 5 and 12ml

Step by step possible use of the SO Easy build build gel

1. First PREP your nails (maw prepare your nails well before placing product, cuticles, file mat, degrease, dust)
2. Place a thin layer of rubber base for extra adhesion.
3. Place a thin layer of SO Easy build (do not cure), then build the nail.
   TIP: Use your microstyler on the sidewalls/nails to finely place the gel here.
4. After placement, you can hold the nail upside down, this will cause your gel to shift to the correct place, making the bulge come into place nicely.
5. Then harden the product in the lamp (60sec LED, 120sec UV).
6. File the product into shape if necessary, filing is not necessary if your product is perfectly placed.
7. Place your colour and topcoat to finish.

Finally, I like to tell you that it is extremely easy to create the perfect Babyboom nails with this product.

To do this, use the Soft White as a white border, and fade it out with your SO Micro Art Brush #0001. Then harden this in the lamp - 60sec LED, 120sec UV. Afterwards, build up the nails with your Sweet Boomer. File the nails into shape, if necessary. And voila, good to go! Quick & easy.

information required

for more knowledge about the SO GUILTY - Iconic Nails range or the SO easy Build building gel, contact info@beautyambitions.eu

The SO Easy Build from the SO GUILTY - Iconic Nails range literally translates to 'So easy to build', and that is exactly what it does. With its auto-leveling structure, you build your nails in no time!

It sets itself nicely into shape, ensuring a beautiful build-up & minimal filing afterwards.

Also, it won't get hot in the lamp, so you won't feel any heat under it.

The function of the SO EASY BUILD building gel

We have been used to building gel coming out of a jar for years, but why choose to use it in a jar? It is mainly the ease and speed with which you can work once you are used to working from a bottle.

• This flexible building gel can be used to strengthen natural nails by forming a nice APEX
• Gives the necessary strength to lengthen nails, both with stencils and tips.
• Can be used for any nail type.

The special features of SO EASY build

we list all the special features for you:

• Building gel in a bottle
• NO HEAT formula - Does not burn in the lamp
• Very good adhesion
• Flexible on the nail
• Self-leveling, very good self-levelling
• Can be placed on tips
• Extend with nail forms
• Strengthen natural nail
• Medium / Low viscosity
• Cures in 60sec LED 48W - 120sec UV lamp 36W
• Acid free
• Available in 3 colours (Clear, Sweet Boomer, Soft White)
• Available in bottles with brush 5 and 12ml

Step by step possible use of the SO Easy build build gel

1. First PREP your nails (maw prepare your nails well before placing product, cuticles, file mat, degrease, dust)
2. Place a thin layer of rubber base for extra adhesion.
3. Place a thin layer of SO Easy build (do not cure), then build the nail.
   TIP: Use your microstyler on the sidewalls/nails to finely place the gel here.
4. After placement, you can hold the nail upside down, this will cause your gel to shift to the correct place, making the bulge come into place nicely.
5. Then harden the product in the lamp (60sec LED, 120sec UV).
6. File the product into shape if necessary, filing is not necessary if your product is perfectly placed.
7. Place your colour and topcoat to finish.

Finally, I like to tell you that it is extremely easy to create the perfect Babyboom nails with this product.

To do this, use the Soft White as a white border, and fade it out with your SO Micro Art Brush #0001. Then harden this in the lamp - 60sec LED, 120sec UV. Afterwards, build up the nails with your Sweet Boomer. File the nails into shape, if necessary. And voila, good to go! Quick & easy.

information required

for more knowledge about the SO GUILTY - Iconic Nails range or the SO easy Build building gel, contact info@beautyambitions.eu

The SO Easy Build from the SO GUILTY - Iconic Nails range literally translates to 'So easy to build', and that is exactly what it does. With its auto-leveling structure, you build your nails in no time!

It sets itself nicely into shape, ensuring a beautiful build-up & minimal filing afterwards.

Also, it won't get hot in the lamp, so you won't feel any heat under it.

The function of the SO EASY BUILD building gel

We have been used to building gel coming out of a jar for years, but why choose to use it in a jar? It is mainly the ease and speed with which you can work once you are used to working from a bottle.

• This flexible building gel can be used to strengthen natural nails by forming a nice APEX
• Gives the necessary strength to lengthen nails, both with stencils and tips.
• Can be used for any nail type.

The special features of SO EASY build

we list all the special features for you:

• Building gel in a bottle
• NO HEAT formula - Does not burn in the lamp
• Very good adhesion
• Flexible on the nail
• Self-leveling, very good self-levelling
• Can be placed on tips
• Extend with nail forms
• Strengthen natural nail
• Medium / Low viscosity
• Cures in 60sec LED 48W - 120sec UV lamp 36W
• Acid free
• Available in 3 colours (Clear, Sweet Boomer, Soft White)
• Available in bottles with brush 5 and 12ml

Step by step possible use of the SO Easy build build gel

1. First PREP your nails (maw prepare your nails well before placing product, cuticles, file mat, degrease, dust)
2. Place a thin layer of rubber base for extra adhesion.
3. Place a thin layer of SO Easy build (do not cure), then build the nail.
   TIP: Use your microstyler on the sidewalls/nails to finely place the gel here.
4. After placement, you can hold the nail upside down, this will cause your gel to shift to the correct place, making the bulge come into place nicely.
5. Then harden the product in the lamp (60sec LED, 120sec UV).
6. File the product into shape if necessary, filing is not necessary if your product is perfectly placed.
7. Place your colour and topcoat to finish.

Finally, I like to tell you that it is extremely easy to create the perfect Babyboom nails with this product.

To do this, use the Soft White as a white border, and fade it out with your SO Micro Art Brush #0001. Then harden this in the lamp - 60sec LED, 120sec UV. Afterwards, build up the nails with your Sweet Boomer. File the nails into shape, if necessary. And voila, good to go! Quick & easy.

information required

for more knowledge about the SO GUILTY - Iconic Nails range or the SO easy Build building gel, contact info@beautyambitions.eu

Perfectly polished nails thanks to Utopian Gelpolish colours.

This highly pigmented gel polish that covers perfectly in 2 layers often only needs 1 layer and gives very nice coverage.

Thanks to the specially shaped brush, you can polish tightly and round off nicely at the cuticle. It only requires slight pressure to set the width of the cuticle.

Moreover, your colour will stay on nicely, will not run into the cuticle or sidewall and will not shrink during curing in the UV lamp.

They may seem insignificant...highly pigmented, good coverage, shaped brush, no shrinkage of product....but for any professional nail stylist, this is crucial to save time and achieve a beautifully painted nail. Because even though you place your nail base perfectly, if you don't have the right quality of colour, your whole set can fail. Herewith you are guaranteed successful nails with SO GUILTY - Iconic Nails.

How should I apply the gel polish correctly?

1. Do a proper PREP, find out the step by step of thorough preparation here.
2. Place a layer of colour on BASE & BASE+ or RUBBERBASE/BIAB, gel, acrylic, acrygel/Polygel/EPIC Fusion. It is not necessary to cleanse first unless you would have filed first. 
3. Apply light pressure by placing your gel polish brush 3 mm from the cuticle until your bristles reaches the width of the cuticle. Then slide  to the cuticle as close as possible to the cuticle without touching.
4. Then hold your Brush flat and hover without pressure all over the nail.
5. Next, turn the finger to one side and with one half of your brush, repeat this step and line up nicely at the side wall line without touching the skin and go all over the side.
6. You turn the finger to the other side and do the same with the other side of the nail.
7. Go very lightly with flat brush and float all over the nail to even out and close the hairline. (= is the edge of the nail free edge)
8. Cure for 30 seconds
9. Apply a 2nd layer if necessary
10. Place a TOP COAT

We show each colour in the photos with a different UTOPIAN GELPOLISH Top Coat

TIP: with acrylics, you can choose to apply a very thin layer of RUBBERBASE/BIAB before you apply the GELPOLISH COLOR. This way, your colour will adhere even better to the acrylic.

What characteristics can you expect?

Utopian Gelpolish colours can be applied to all artificial products such as BASE & BASE+ or RUBBERBASE/BIAB but also gel, acrylic, acrygel/Polygel/EPIC Fusion

• More than 250 highly pigmented colours that cover in 1-2 layers
• Does not shrink in the UV lamp
• Soakable 10-15minutes
• Easy to use thanks to the pre-shaped brush
• Available in 5 and 12ml
• Numerous gel polish colours with effects.

Where to find us?

Questions about the Utopian Gelpolish colours? Or other questions? Feel free to contact us

© copyright 2023 SGBC

Copying texts or making changes is prohibited.